CROSSMELV
EN ID

CrossMelv 0.7.3

How to install.

About 10 minutes. Charge the reader to at least 50% first.

What’s on your reader now?

Only for the Xteink X4 Pro. Not for the X4, X4C or X3: it won’t start on them. Check the back of your reader or the box.

Tap yours. Not sure? Look at the menu language.

No laptop needed. You can do it all from your phone.

  1. Put the file on the SD card

    Download it. Easiest from your phone: on the reader open File Transfer, open the address it shows in your phone browser and upload the file. Or plug into a laptop with USB Drive.

  2. Install it

    Settings → System → SD Card Firmware Update, then pick the file.

  3. Leave it 15 seconds

    After it restarts, don’t touch it for 15 seconds. Done.

After this, updates come over Wi-Fi.

Sleep screen
  1. Plug the reader into your computer

    Use the magnetic cable that came with it, on a Windows or Mac laptop/PC. Open Google Chrome.

  2. Install CrossPoint first

    Go to crosspointreader.com/#flash-tools, pick X4 Pro → CrossPoint (stable) and press Flash.

    Don’t flash the CrossMelv file here. The SD steps check it first and can undo it on their own.

  3. Wait until CrossPoint starts

    Unplug the cable when you see its home screen.

CrossMelv home screen
  1. Don’t update the reader’s own system

    If it offers an update, say no. A newer one can block the next step.

  2. Download the Xteink Unlocker app

    You need a laptop or PC for this one step.

  3. Follow the app

    Open it and pick X4 Pro → Chinese → CrossPoint → OTA Flash. The app guides you step by step, just follow it.

    Using a VPN app? Turn it off first.

  4. Update the reader over Wi-Fi

    On the reader, connect to the Wi-Fi called crosspoint, open System Update and install.

    Stuck at 100%? Press Escape Hatch in the app.

Settings screen

Update over Wi-Fi

Needs CrossMelv 0.6.1 or newer. Older? Use the SD steps once.

  1. Connect the reader to Wi-Fi

    Transfer → Join a Network. Only the first time.

  2. Check for updates

    Settings › System › Check for Updates

  3. Tap Install

    Battery 30% or more. Don’t turn it off. About 3 minutes.

Update screen

Something went wrong?

Don’t panic. If it fails to start, it goes back to the old system by itself. You can also hold the Next page button and press Power, then pick another firmware file from the card.

Free · Recommended

Dictionary pack.

English and Indonesian, both ways. Over 140,000 words, with meanings in both languages.

Easiest

On the reader: Settings › Reader › Dictionary › Download. No phone needed.

Needs CrossMelv 0.6.5 or newer. On 0.6.1–0.6.4: Transfer → Install Kamus on your phone.

Or by hand

  1. Unzip the file

    You get one folder.

  2. Copy the folder to your SD card

    Just drop it in, not inside any other folder.

  3. Long-press a word, tap Look Up

    The meaning pops up.

Connect an IINE GameBrick (optional)

  1. Turn on Bluetooth

    Settings → Controls → Bluetooth Remote → On

  2. Switch the GameBrick to T

  3. Hold its small button 3 seconds

    Until the light blinks fast.

  4. Tap Scan & pair → IINE-Control

    B = next page, A = back.

Bluetooth Remote screen

Questions

Does it work on the X3, X4 or X4 Classic?

Not yet. Only the X4 Pro.

It froze after installing. What now?

Hold Power for 15 seconds, then turn it on again. Still stuck? Plug it into a laptop, flash CrossPoint at crosspointreader.com, then install CrossMelv with the SD steps. Also check it’s an X4 Pro.

Is it safe?

Yes. If anything goes wrong, it goes back to the old system by itself. It is unofficial, so install at your own risk.

Will I lose my books?

No. Your books stay on the card.

Can it open books bought on Kindle or Google Play?

No, those are locked. Use normal EPUB files.

A book has no chapters. Can I fix it?

Yes, with the EPUB fixer. Only have a PDF? Use PDF to EPUB.

How do I add a dictionary?

On the reader: Transfer → open the page on your phone → tap Install Kamus. Or by hand.

How do I update later?

Settings › System › Check for Updates. It updates over Wi-Fi. See the 3 steps.

How do I go back to CrossInk or CrossPoint?

Same 3 steps, just pick their file instead.

For tech people (optional)

Check the file: SHA-256 must be ff676a23e1bd423d14b68e5ecd89a0f4b6ea159cc92410ebe853cf200c9e2b4c (shasum -a 256 crossmelv-0.7.3-x4pro.bin).

Chip: ESP32-S3. Writes only the app slots; bootloader, partitions and eFuses are untouched. Source code (GPLv3) is in the download section.

Support

Free. Always.

Like CrossMelv? Buy me a coffee. It keeps the updates coming.